Excavator Basin Corner Gear Accessories
The full name of the basin corner teeth of Excavator Parts is called the differential active and passive teeth, which are divided into two parts: the main teeth and the passive teeth, commonly known as the disc corner teeth.
Basin corner tooth single stage reducer
The single-stage reducer is an active vertebral gear (commonly known as Angle teeth), and a from the basin corner teeth, the active vertebral gear connected to the drive shaft, clockwise rotation, from the basin corner teeth attached to its right side, the point of engagement rotates downward, consistent with the direction of the wheel forward. Because the diameter of the driving bevel gear is small and the diameter of the basin corner tooth is large, the function of deceleration is achieved.
Basin corner tooth double stage reducer
The two-stage reducer has an intermediate transition gear, the left side of the active vertebral gear engages with the umbrella tooth part of the intermediate gear, and the basin corner gear has a spur gear with a small diameter coaxial, and the spur gear engages with the driven gear. So the middle gear turns backwards and the driven gear turns forwards. There are two stages of deceleration in between. Due to the increase in the volume of the excavator axle, the two-stage deceleration was mainly used in the matching of vehicles with low engine power, and it was mainly used in the construction machinery with low speed and high torque.
In addition, our company also produces other excavator parts, such as Machinery Parts ,Chassis Parts and so on .If necessary, please contact us.
Specification
No. PART NUMBER QTY NAME
1 316506303 48 BOLT
2 316504345 122 WASHER
3 803092088 1 SLEWING BEARING
4 805004833 2 PIN 20×55 GB/T120.1-2000
5 329901048 74 BOLT
6 801102863 8 OIL CUP R1/8
7 801102857 8 JATCONNECTOR
8 801102842 1 LUBRICATING PIPE
9 800902667 1 HIGH PRESSURE RESIN HOSE ASSEMBLY
10 803085240 1 ROTARY MOTOR AND REDUCER
11 803085241 1 ROTARY MOTOR AND REDUCER
12 316500002 2 PIN
13 805338299 24 WASHER 24 GB/T1230-2006
14 329900938 24 BOLT
15 316504347 8 PLUG
16 329900302 10 THICKENED FLAT WASHER
17 805046535 2 BOLT M10×55 GB/T5783-2000
18 801102897 4 JDCCONNECTOR
19 316506163 1 PLATE
20 819960044 2 HOSE
21 819960043 2 HOSE
22 801905479 8 RUBBER SLEEVE HOOP
23 805046525 8 BOLT M10×20 GB/T5783-2000
Contact Now
