Excavator metal pipe accessories

Excavator metal pipe accessories

Excavator Parts storage, must do the following points:

(1) Before storage, it is necessary to maintain the machinery, repair the damaged excavator parts, and thoroughly clean them to keep the technical condition in good condition.

(2) Should be parked in a dry room. If you have to park outside, you should choose a flat surface and cover it with wooden boards. Cover with a cloth after parking.

(3) Storage of excavator parts and engines.

① Discharge the cooling water in the engine.

② Change the engine oil. The new oil is usually neutral and will not corrode the metal parts of the engine.

③ Fill the fuel tank with diesel fuel to avoid rust. Preservatives should also be added if conditions permit.

④ During the shutdown period, the engine should be started once a month to make the machinery travel a short distance, so that a new oil film is established at the lubrication of each part to prevent rust.

Note: The cooling water should be filled before starting, and the cooling water should be drained at the end.

In addition, our company also produces other excavator parts, such as Machinery Parts ,Chassis Parts and so on .If necessary, please contact us.

Specification

No. PART NUMBER QTY NAME

1 316506303 48 BOLT

2 316504345 122 WASHER

3 803092088 1 SLEWING BEARING

4 805004833 2 PIN 20×55 GB/T120.1-2000

5 329901048 74 BOLT

6 801102863 8 OIL CUP R1/8

7 801102857 8 JATCONNECTOR

8 801102842 1 LUBRICATING PIPE

9 800902667 1 HIGH PRESSURE RESIN HOSE ASSEMBLY

10 803085240 1 ROTARY MOTOR AND REDUCER

11 803085241 1 ROTARY MOTOR AND REDUCER

12 316500002 2 PIN

13 805338299 24 WASHER 24 GB/T1230-2006

14 329900938 24 BOLT

15 316504347 8 PLUG

16 329900302 10 THICKENED FLAT WASHER

17 805046535 2 BOLT M10×55 GB/T5783-2000

18 801102897 4 JDCCONNECTOR

19 316506163 1 PLATE

20 819960044 2 HOSE

21 819960043 2 HOSE

22 801905479 8 RUBBER SLEEVE HOOP

23 805046525 8 BOLT M10×20 GB/T5783-2000